Skip to content

How to Fix Orange Light on Garage Door Sensor: Quick Solutions!

To fix the orange light on a garage door sensor, check if there are any obstructions blocking the sensor’s beam and ensure that the sensors are properly aligned. Garage door sensors are an important safety feature of any automatic garage door system.

They detect if anything or anyone is blocking the door’s path when closing, and if so, the door will stop its movement to avoid damage or injury. However, when an orange light blinks on the sensor, it’s usually an indication of a problem.

This article will guide you on how to fix the orange light on garage door sensors. Many issues can cause the sensor’s light to stay orange, but the most common one is misaligned sensors. Hence, the solution is simple. You need to check for anything obstructing the beam’s pathway and align the sensors correctly. This will get your garage door’s sensor working again.

How to Fix Orange Light on Garage Door Sensor: Quick Solutions!


Reasons For Orange Light On Garage Door Sensor

Garage door sensors play a significant role in ensuring the safety and security of your home. However, when the sensor’s light turns orange, it could indicate a problem that needs your immediate attention. In this section, we’ll look at some potential causes of the orange light blinking on a garage door sensor.

Possible Issues With Wiring

One of the most common causes of an orange light on your garage door sensor is a wiring issue. Faulty wiring can disrupt the communication between the sensors, causing the light to turn orange. Wiring issues can also occur due to damaged or frayed wires, which may have been chewed on by rodents or exposed to extreme weather conditions.

To fix this problem, head to the garage’s control box and check the wiring connections. Ensure that the wires are tightly connected and none are loose or disconnected. If the wires are damaged, replace them immediately.

Possible Issues With Alignment

The garage door sensors work best when they’re aligned correctly. When they’re not, the sensors cannot communicate effectively, resulting in the orange light blinking. With time, the sensors can get misaligned due to the door’s regular use or accidental bumps.

To check for an alignment issue, stand at the door’s opening and look at the sensors’ eyes on each side of the door. Ensure that they’re pointing directly at each other and are at the same height. If not, adjust the sensors until they’re properly aligned.

Possible Issues With Obstruction

Garage door sensors can also show an orange light when there’s an obstruction blocking the sensors’ path. The obstruction could be in the form of leaves, debris, or other objects that interfere with the sensor’s ability to communicate. Ensure that there are no objects blocking the sensors’ path.

Possible Issues With Sensor Malfunction

Sometimes, an orange light on the garage door sensor could indicate a malfunction in the sensor itself. Malfunctions could occur due to various reasons, including damage, wear and tear, or a malfunctioning circuit board.

If you’ve tried fixing the wiring, alignment, and obstruction issues, and the sensor’s light still turns orange, it could indicate a malfunction. Replacing the sensor might be your best option.

An orange light on your garage door sensor is a warning sign that something isn’t right. Use these potential causes to troubleshoot the problem and fix it. Regular maintenance can also help prevent future issues with the sensors.

Quick Solutions

Quick Solutions: Fixing The Orange Light On Garage Door Sensor

Facing an orange light on your garage door sensor can be quite frustrating, especially when the door doesn’t function correctly. However, before diving into complex troubleshooting, it’s always wise to start by checking the basics.

Highlight The Importance Of Checking The Basics

Here are some simple issues to check when troubleshooting your garage door sensor:

  • Power supply: Ensure that the sensor’s power source is connected and working correctly.
  • Battery replacement: If your garage door sensor battery is old and needs to be replaced, do so before moving on to advanced troubleshooting. Batteries can die without any warning, which could be the root cause of your problem.

Mention Easy-To-Fix Issues

If your garage door sensor still shows an orange light, try these quick solutions:

  • Cleaning the sensor: It’s possible that the sensor lens may be dirty, which could be the cause of the issue. Using a clean cloth, gently wipe the sensor lens to remove any dirt or debris.
  • Realignment: If the sensor is slightly miscued, it could be causing trouble. Adjust it slightly to align it with the opposite side’s sensor. Simultaneously, check if the photoelectric eye is clean and without any obstruction.
  • Obstruction removal: A misplaced box or garbage bin could obstruct the garage door sensor’s line of sight, signaling it to not operate at its full potential. Ensure there are no obstacles in the sensor’s path.

Detailed Instructions And Tips For Advanced Solutions

If the above quick solutions don’t work, you may need to dig deeper and try some of these advanced troubleshooting solutions:

  • Adjust sensor sensitivity: Garage door sensors come with adjustable sensitivity settings. If the sensors are too sensitive, they will mistakenly detect something in the path, even though nothing’s there. Adjust the sensor’s sensitivity to the lower side to see if that rectifies the issue.
  • Check wirings: Loose or damaged wiring can lead to issues with the garage door sensor. Check thoroughly to see if there’s any misconnection, damage, or wear and tear on the wirings. Replace or fix the damaged or loose wiring if found any, but remember to disconnect the power source before doing so.
  • Replace faulty parts: Old and damaged sensors could be causing issues with the garage door sensor’s proper functioning. Replace the faulty sensor with a new one to see if anything changes.

Remember, these troubleshooting steps require safety precautions, and you must know when to call a professional garage door repair company for help.

Common Mistakes To Avoid

When it comes to fixing an orange light on a garage door sensor, there are a few common mistakes that you should avoid. These mistakes can lead to further issues, and even result in injuries. Before attempting any solution, it’s important to read the manufacturer’s guidelines carefully and take all necessary safety precautions.

Here are some examples of common mistakes people make while trying to fix a garage door sensor:

  • Not cleaning the sensor lenses: Dirt and debris on the sensor lenses can prevent the sensors from detecting each other, causing the orange light to appear. Make sure that you clean the lenses with a soft cloth or cleaning spray.
  • Improperly aligning the sensors: The sensors must be aligned with each other to work correctly. Ensure that they are facing each other and are not obstructed by any objects.
  • Over-tightening the sensor: Over-tightening the sensor can cause damage to the housing and may affect its functionality.
  • Incorrectly wiring the sensors: Wiring the sensors incorrectly can lead to a short circuit, damaging the sensors and the garage door opener.
  • Ignoring safety precautions: Garage door sensors are delicate and require careful handling. Make sure that you turn off the garage door opener before attempting to fix any issues with the sensors. Keep your hands and tools away from the moving parts of the garage door.

In addition to avoiding these mistakes, it’s crucial to follow the manufacturer’s guidelines closely and take all necessary safety precautions. Remember that fixing a garage door sensor can be a hazardous task if not done correctly. If you’re not confident in your abilities, it’s best to call in a professional.

Frequently Asked Questions On How To Fix Orange Light On Garage Door Sensor

What Causes An Orange Light On A Garage Door Sensor?

An orange light on the garage door sensor indicates a misalignment or malfunction.

How Do I Fix An Orange Light On A Garage Door Sensor?

To fix an orange light on a garage door sensor, check for obstructions, clean the sensors, and realign them.

Why Won’T My Garage Door Close With An Orange Light On The Sensor?

The orange light on the sensor means there is an obstruction, so the garage door won’t close. Fix the sensor to resolve the issue.

Can I Reset The Garage Door Sensor To Fix An Orange Light?

Yes, you can reset the garage door sensor to fix the orange light by turning off the power and then turning it back on.

How Do I Know When The Garage Door Sensor Is Working Properly?

The garage door sensor should show a green light when aligned correctly and the door should operate smoothly without any obstructions.

Should I Call A Professional To Fix The Garage Door Sensor?

If the sensor issue persists after trying basic troubleshooting methods, it’s best to call a professional technician for repairs.


After extensively exploring the different ways to fix the orange light on garage door sensors, it is safe to say that it is a common issue that needs to be taken seriously. The problem might arise due to simple misalignment or wiring issues, but it can also be a result of potentially hazardous complications in the electrical system.

Regardless of the reason, knowing your way around the sensors can save you a lot of time and money in the long run. As discussed in this article, we have provided you with effective and practical solutions that can help you fix the issue with ease.

Regular maintenance and inspections of your garage door sensors can go a long way in ensuring that they remain in good working condition. So, make sure to follow these tips and tricks to keep your garage door operation running smoothly for years to come.