How to Open a Trunk Without a Key from the Outside

In order to open a trunk without a key from the outside, you will need a few tools. The first tool needed is an electric drill with a small bit. You should locate the lock on the trunk and then carefully drill into it until you can feel resistance, indicating that you have drilled through the lock mechanism.

Once this has been done, use pliers or tweezers to grab onto any pin-like objects that may be inside of the lock and pull them out until they disengage from each other. After all of these pins are removed, try wiggling or pressing down on the latch as if you were unlocking it normally but with your hand instead of using a key in order to unlock it manually. If all else fails, contact either an automotive locksmith or dealership for advice on how best to open your car’s trunk without a key from the outside.

• Step 1: Inspect the trunk from outside
• Look for any visible locks or latches that may be holding it closed
• If you see one, check to see if there is a keyhole and try inserting a thin metal rod or hanger in the keyhole to unlock it
• Step 2: Use an electric pick gun, if necessary
• An electric pick gun works by blasting electricity through a pin tumbler lock cylinder at high speed in order to move each pin until it opens up the lock mechanism
• This can take some time but is often effective when other methods fail
• Step 3: Try using a slim jim tool on power door locks, as these are common on trunks of older cars that don’t have central locking systems built into them yet
• Slide the slim jim between the window and rubber seal around it until you find something solid like metal which will indicate where the power door lock actuator is located – use this as your point of entry with your slim jim tool so you can manipulate the latch inside and open up your trunk without keys from outside
• Step 4: Pry off any plastic panels covering access points near hinges or handles if necessary – this could provide access to manual unlocking mechanisms such as rods or levers inside that allow opening from outside without having keys available at all times

Credit: www.youtube.com

How Do You Open a Back Trunk Without a Key?

If you find yourself in a situation where you need to open your back trunk without a key, there are several methods that you can use. Depending on the type of vehicle and its locking mechanisms, one of these techniques may work for you. The first option is to try using a slim jim tool which is inserted into the car door near the lock and manipulates it so that the trunk can be opened.

If this doesn’t work, then another technique is to use an inflatable wedge or long-handled tool called a “slimjacker” to create space between the car body and window glass in order to slip something thin through and manipulate the latch from inside. Finally, if all else fails, many locksmiths offer emergency lockout services which will allow them to come out with specialized tools specifically designed for opening trunks without keys.

How Do You Open a Trunk With a Screwdriver from the Outside?

Opening a trunk with a screwdriver from the outside can be tricky, but with the right tools and knowledge it can be done. First you will need to locate the screws that hold the trunk closed. These screws are usually located around the edges of where the lid meets the body of your car’s trunk.

You may need to feel or look for these screws to find them; they are often hidden beneath trim pieces or plastic covers on some vehicles. Once you have found all of these screws, use a screwdriver to unscrew each one until there is no tension keeping them in place and then carefully lift up on the lid until it pops open. If needed, you may have to wiggle or jiggle it back and forth slightly as well in order for it to come loose.

With patience and care this method should get your car’s trunk open without too much difficulty!

What to Do If You Locked Your Keys in Your Trunk?

If you find yourself in the unfortunate situation of being locked out of your trunk, there are several steps you can take to get back into your vehicle. First and foremost, if possible, find a spare key or have someone bring one to you so that you can unlock it manually. If that’s not an option for whatever reason, many modern cars come with an emergency release switch inside the car itself.

This is usually located near the driver’s seat or dashboard and will allow you to open the trunk from within the vehicle. However, if all else fails, calling an automotive locksmith is probably your best bet as they’ll be able to quickly pick or cut open your lock without damaging anything else on your car. Additionally, some auto clubs and insurance companies also provide roadside assistance which may include unlocking services as well!

Is There Another Way to Open Trunk?

Opening the trunk of a vehicle can be done in several ways. Many vehicles come with an electronic key fob or smart key that allows you to unlock and open the trunk without having to physically access it. Other cars may have a push button near the driver’s seat, while older models may feature a physical keyhole located somewhere near the back of the car (this is usually found on the door frame).

Additionally, some vehicles offer an emergency release cable inside of the glove box which will manually open your trunk if necessary. Ultimately, there are multiple methods for opening your vehicle’s trunk depending on what type and model you drive.

Unlock Trunk without Key Or Dead Battery!!!

How to Open a Trunk With a Screwdriver from the Outside

Opening a trunk with just a screwdriver from the outside is relatively easy and straightforward. First, use the flat head of the screwdriver to pry off any plastic covers or trim around the edge of your trunk that might be hiding screws beneath them. Once these are removed, look for small holes in either corner of the trunk lid; these will usually contain screws which you can unscrew using your screwdriver.

After they have been removed, you should be able to lift up on the trunk and it should open from there!

How to Open a Car Without a Key from the Outside

Opening a car without the key from the outside can be done in several ways. The most popular way is to use a Slim Jim tool, which slides between the window and weatherstripping for cars with manual locks. A professional locksmith might also be able to pick or bypass your lock if you have an electronic one.

Alternatively, you can try using a coat hanger by shaping it into a hook and sliding it down into the door frame to unlock it manually.

How to Unlock Trunk With Keys Locked Inside

If you lock your keys inside the trunk of your car, don’t fret. There are several methods for unlocking the trunk without causing any damage to the vehicle. The most common method is to use a slim jim tool, which is inserted into the interior door panel at an angle so that it can be used to manipulate and unlock the latch mechanism on the trunk.

Alternatively, you can call a locksmith or tow truck driver who will have specialized tools designed specifically for this purpose.

How to Open a Truck Without a Key from the Outside

If you have locked yourself out of your truck and don’t have access to a spare key, there are ways to open the door from the outside without damaging your vehicle. You can use a Slim Jim tool or an inflatable wedge, both of which will help create enough space between the window and weather stripping for you to reach in and unlock the door. If neither of these methods work, you may need to call a professional locksmith who is experienced in safely unlocking vehicles.

Conclusion

This blog post has provided helpful information in how to open a trunk without a key from the outside. Although it can be tricky and may require some patience, following these simple steps will help you get your trunk safely opened. Keep in mind that if all else fails, you should call an automotive locksmith for assistance or take your vehicle to a professional service center for further inspection.